10000kg Polyester Flat Webbing Sling EN1492-1 Crane Equipment Lifting Straps
6000kg Polyester Flat Webbing Sling EN1492-1 Crane Equipment Lifting Straps
|Length||As client request|
|Certification||CE GS TUV ISO|
|Safety Factor||7 to 1, and we can make 5 to 1, 6 to 1 and 8 to 1 as well.|
|Package||Film shrinked with outer carton and Pallet 20 Pallets per 20 feet container|
1 100% high tenacity polyester fiber. Double A Class raw material fiber
2 Double Plies slings. Of course , we can make one ply, three plies and four plies as well.
3 With reinforcement on lifting eyes.
4 100% polyester sewing thread
Inspect slings each day before use, looking for:
Missing or unreadable ID tag
Melted, charred or weld-splattered areas
Acid or alkali burns
Holes, tears, cuts, snags or embedded particles
Broken or worn stitching
Excessive abrasive wear or elongation
Knots or brittle areas
Broken, corroded, pitted distorted fittings
Do not use worn or damaged slings or attachments. Discard or repair them. Use damaged slings only after they are repaired, reconditioned, and proof tested by the sling manufacturer or a qualified person. Keep certificates of proof test.
Maintenance requirements are minimal. Belt slings may be cleaned with clear water. Remember weak chemical
solutions will become increasingly stronger by evaporation. Regularly inspect belt slings and, in the event of the
following defects, refer the sling to a Competent Person for thorough examination: illegible markings; damaged,
chaffed or cut webbing; damaged or loose stitching; heat damage; burns; chemical damage; solar degradation;
damaged or deformed end fittings.
Q1: Can you provide OEM/ODM service?
Yes. We have professional designers and engineers provide excellent OEM/ODM service.
Q2: What is your MOQ?
Usually it's 100pcs for each type.
Q3: Do you have certificate?
Yes,we have the certificate of ISO9001:2008 and most of our products have been approved by TUV GS certificate .
Q4: What about logo printed?
Your own logo can be printed on label,webbing or package!
Q5: How do you control your quality?
1.Selection of high-quality material
2.Production process standardization, process standardization, refinement.
3.Testing products before bulk producation everytime.
4.The third party product inspections are acceptable.
5.ISO Quality Management System Certificated Factory
6.Inspection before loading.
Q6: How can I get samples?
We are honored to offer you a small quantity of free samples, but clients are expected to pay for the courier cost.
Q7:What's your terms of delivery?
Q8: What are your payment terms?
In generally,payment terms is T/T 30% Deposit, 70% by the Copy of B/L.