JiangSu Tianhua Rigging Co., Ltd 86-523-89507666 info@tianhua-rigging.com
High Tenacity Yellow One Way Lifting Slings 2500kg Working Load Rainproof

High Tenacity Yellow One Way Lifting Slings 2500kg Working Load Rainproof

  • High Light

    endless lifting slings

    ,

    polyester endless slings

  • Colour
    Yellow
  • Material
    Polyester
  • Standard
    EN1492-1 2000
  • Brand
    Slingman
  • Type
    Endless
  • Certification
    CE GS TUV ISO
  • Label
    Blue
  • Shape
    Flat
  • Safety Factor
    7 To 1
  • Place of Origin
    JiangSu China
  • Brand Name
    Slingman
  • Certification
    CE GS TUV ISO
  • Model Number
    TSEWS2500
  • Minimum Order Quantity
    100
  • Price
    Negotiate
  • Packaging Details
    Film shrinked with outer carton
  • Delivery Time
    35 days since order confirmed
  • Payment Terms
    TT DP
  • Supply Ability
    20000 Per month

High Tenacity Yellow One Way Lifting Slings 2500kg Working Load Rainproof

High Tenacity Yellow One Way Lifting Slings 2500kg Working Load Rainproof

 

WLL   2500KG

Width  60mm                                                                                                                                                      

Color   Yellow    

Certification   CE GS TUV ISO

Safety Factor   7 to 1 , but we can make 5 to 1 as well.                    

Package   Binded with belt and outer carton, Pallets   20 Pallets per 20 feet container      

 

1 100% high tenacity polyester fiber. Double A Class raw material fiber

2 100% polyester sewing thread

3 Blue label with client's logo, serial number and plastic coat

 

Material
Polyester is resistant to moderate strength acids but is damaged by alkalis; polyamide (Nylon) is virtually immune to
alkalis but is damaged by acids; and polypropylene is little affected by acids or alkalis but is damaged by some
solvents, tars and paints.
 

Features

 

Single Use - One Way
Low cost, simple design
Easy to use
Stronger and more compact than rope or wire rope alternative solutions.
Can be attached or built in to a structure or load, but must only be used to perform a single complete lift.
Saves time and cost on-site slinging and reslinging loads.

 

Inspect slings each day before use, looking for:

 

Missing or unreadable ID tag
Melted, charred or weld-splattered areas
Acid or alkali burns
Holes, tears, cuts, snags or embedded particles
Broken or worn stitching
Excessive abrasive wear or elongation
Knots or brittle areas
Broken, corroded, pitted distorted fittings

Do not use worn or damaged slings or attachments. Discard or repair them. Use damaged slings only after they are repaired, reconditioned, and proof tested by the sling manufacturer or a qualified person. Keep certificates of proof test.

Maintenance requirements are minimal. Belt slings may be cleaned with clear water. Remember weak chemical
solutions will become increasingly stronger by evaporation. Regularly inspect belt slings and, in the event of the
following defects, refer the sling to a Competent Person for thorough examination: illegible markings; damaged,
chaffed or cut webbing; damaged or loose stitching; heat damage; burns; chemical damage; solar degradation;
damaged or deformed end fittings.