60mm Width 2T Green Color 100% Polyester Webbing Sling With Flat Or Becket Eyes

Place of Origin JiangSu China
Brand Name Slingman
Certification CE GS TUV ISO
Model Number TSWB02-7
Minimum Order Quantity 1000
Price Negotiate
Packaging Details Film shrinked with outer carton
Delivery Time 35 days since order confirmed
Payment Terms TT DP, L/C
Supply Ability 20000 Per month
Product Details
Color Green Material Polyester
Standard EN1492-1 2000 Type Webbing Sling
Label Blue Pattern Flat Woven Pattern Webbing
Safety Factor 7 To 1 Certification CE GS TUV ISO
Place Of Origin JiangSu China
High Light

100% Polyester Webbing Sling

,

60mm Width Polyester Webbing Sling

,

Becket Eye Webbing Sling 2 Ton

Leave a Message
Product Description

60mm Width 2T Color Code Green 100% Polyester Webbing Sling With Flat Or Becket Eyes

 

  • WLL      2T
  • Width    50mm or 60mm
  • Length   As client request
  • Colour   Green
  • Standard   EN1492-1 2000
  • Certification    CE GS TUV ISO
  • Safety Factor  7 to 1, and we can make 5 to 1, 6 to 1 and 8 to 1 as well.
  • Package    Film shrinked with outer carton and Pallet      20 Pallets per 20 feet container

 

1  100% high tenacity polyester fiber.  Double A Class raw material fiber

2  Double Plies slings. Of course , we can make one ply, three plies and four plies as well. 

3  With reinforcement on lifting eyes. 

4  100% polyester sewing thread

 

          60mm Width 2T Green Color 100% Polyester Webbing Sling With Flat Or Becket Eyes 0


Flat Webbing Sling is woven with machine for one time, and processed in the different sewing methods, it can be used the strengthened eye on its ends to improve its strength. Its standard tonnage can be distinguished through the color, and the wide and smooth loading surface especially applies to the articles with the soft surface and if necessary, the protective sleeve which is wider than sling can be used. Because of no contacting metal, it causes hardly damage to the loaded article surface processed with lacquer. Flat woven webbing sling made from polyester can not cause sparkle if it is used under the hazardous and explosive environment. In addition, its low extending property can decrease the bound of load in the courses of lifting, and avoid damage from the shocking strength. At the same time, make codes for the dyeing colors of sling and suggest the simple and correct methods for loading, which is well convenient for our lifting user.

 

 

Capacity

 

The sling must be both long enough and strong enough for the load and the slinging method. Apply the mode factor

for the slinging method. For use at temperatures exceeding 80°C or below 0°C refer to the suppliers instructions. If

the slings are used in multi-leg arrangement the angle formed between the legs should not be less than 30° or

greater than 90°. If abrasion, heat generated by friction or cutting from edges or corners are likely, select a sling

fitted with protective sleeves and/or use suitable packing.

 

Inspect slings each day before use, looking for:

 

Missing or unreadable ID tag
Melted, charred or weld-splattered areas
Acid or alkali burns
Holes, tears, cuts, snags or embedded particles
Broken or worn stitching
Excessive abrasive wear or elongation
Knots or brittle areas
Broken, corroded, pitted distorted fittings

Do not use worn or damaged slings or attachments. Discard or repair them. Use damaged slings only after they are repaired, reconditioned, and proof tested by the sling manufacturer or a qualified person. Keep certificates of proof test.

 

Maintenance requirements are minimal. Belt slings may be cleaned with clear water. Remember weak chemical

solutions will become increasingly stronger by evaporation. Regularly inspect belt slings and, in the event of the

following defects, refer the sling to a Competent Person for thorough examination: illegible markings; damaged,

chaffed or cut webbing; damaged or loose stitching; heat damage; burns; chemical damage; solar degradation;

damaged or deformed end fittings.

 

 

Our Services

 

1. Client

We treasure and try to understand all the different needs of our clients and seek to forge a long term professional relationship with them. The satisfaction of each and every customer is our main goal and motivation in conducting our business.

2. People

We work as a team and treat each other with respect. Our solid, capable and knowledgeable team is valued as the greatest asset and an integral part of the business.

3. Product

Our products are of high quality standards and always come with certificate of compliance by the manufacturers.

4. Performance

We aim to achieve high level of performance and satisfaction to both our client and people, which include delivering high quality services and treating people with integrity.

5. Free sample and OEM service

We can provide free samples to you and we also have OEM service.If you have anny query,please feel free to contact us.FREE SAMPLES will be sent out for your evaluation!