2T Polyester Flat Webbing Sling Green Color For Railway Construction
|Pattern||Flat Woven Pattern Webbing||Lifting Eye Type||Folding 1/2 Of Eyes From One Side|
|Safety Factor||7 To 1|
webbing lifting slings,
flat web lifting slings
2T polyester flat webbing sling for used Construction of Railway, Petroleum
|Width||50mm or 60mm|
|Length||As client request|
|Certification||CE GS TUV ISO|
|Safety Factor||7 to 1, and we can make 5 to 1, 6 to 1 and 8 to 1 as well.|
|Package||Film shrinked with outer carton and Pallet|
1 100% high tenacity polyester fiber. Double A Class raw material fiber.
2 Double Plies slings. Of course , we can make one ply, three plies and four plies as well.
3 With reinforcement on lifting eyes.
4 100% polyester sewing thread.
Inspect slings each day before use, looking for:
Missing or unreadable ID tag Melted, charred or weld-splattered areas
Acid or alkali burns Holes, tears, cuts, snags or embedded particles Broken or worn stitching Excessive abrasive wear or elongation Knots or brittle areas Broken, corroded, pitted distorted fittings .Do not use worn or damaged slings or attachments. Discard or repair them. Use damaged slings only after they are repaired, reconditioned, and proof tested by the sling manufacturer or a qualified person. Keep certificates of proof test.
Maintenance requirements are minimal. Belt slings may be cleaned with clear water. Remember weak chemical solutions will become increasingly stronger by evaporation. Regularly inspect belt slings and, in the event of the following defects, refer the sling to a Competent Person for thorough examination: illegible markings; damaged, chaffed or cut webbing; damaged or loose stitching; heat damage; burns; chemical damage; solar degradation; damaged or deformed end fittings.
The sling must be both long enough and strong enough for the load and the slinging method. Apply the mode factor for the slinging method. For use at temperatures exceeding 80°C or below 0°C refer to the suppliers instructions. If the slings are used in multi-leg arrangement the angle formed between the legs should not be less than 30° or greater than 90°. If abrasion, heat generated by friction or cutting from edges or corners are likely, select a sling fitted with protective sleeves and/or use suitable packing.
We treasure and try to understand all the different needs of our clients and seek to forge a long term professional relationship with them. The satisfaction of each and every customer is our main goal and motivation in conducting our business.
We work as a team and treat each other with respect. Our solid, capable and knowledgeable team is valued as the greatest asset and an integral part of the business.
Our products are of high quality standards and always come with certificate of compliance by the manufacturers.
We aim to achieve high level of performance and satisfaction to both our client and people, which include delivering high quality services and treating people with integrity.
5. Free sample and OEM service
We can provide free samples to you and we also have OEM service.