Wear Resistant 10T Endless Polyester Flat Webbing Sling

Heavy-duty 10T 12T 20T 50T Endless Lifting Belt / Webbing sling / Lifting Sling Wholesale

Material

Nylon and polyester webbing slings are lighter, less bulky, and much more convenient to handle than conventional wire rope, chain, wire mesh, or manila rope slings of comparable capacity. The most delicate or highly polished surfaces can be handled without the danger of being marred or scratched. Synthetic slings are also considered to be much safer than traditional slings.

They are manufactured from 100% nylon or polyester webbing, which Slingman slings possess a safety factor of 7. Every sling is identified with a permanent sewn tag indicating working load limit, type of material, and logo. Another few other key factors when deciding to choose a synthetic sling are that they are non-decaying, shock-absorbing, quality material, and you are getting a certified sling.

Synthetic slings are highly resistant to rot, mildew, and aging. They can be readily used in wet or even saltwater applications. Slingman synthetic slings have a factor of elasticity allowing them to absorb heavy shock thereby cushioning a load rather than subjecting it to sudden jamming. They are highly resistant to abrasion, lubricants, chemicals, and are substantially inert to alkalies. Finally, We individually proof-tests synthetic slings and/or assemblies if requested by the customer. 

Inspect slings each day before use, looking for:

Missing or unreadable ID tag
Melted, charred or weld-splattered areas
Acid or alkali burns
Holes, tears, cuts, snags or embedded particles
Broken or worn stitching
Excessive abrasive wear or elongation
Knots or brittle areas
Broken, corroded, pitted distorted fittings

Do not use worn or damaged slings or attachments. Discard or repair them. Use damaged slings only after they are repaired, reconditioned, and proof tested by the sling manufacturer or a qualified person. Keep certificates of proof test.

Maintenance requirements are minimal. Belt slings may be cleaned with clear water. Remember weak chemical
solutions will become increasingly stronger by evaporation. Regularly inspect belt slings and, in the event of the
following defects, refer the sling to a Competent Person for thorough examination: illegible markings; damaged,
chaffed or cut webbing; damaged or loose stitching; heat damage; burns; chemical damage; solar degradation;
damaged or deformed end fittings.

FAQ

1. How long will receive a reply ?

When we get your inquire ,we will reply you ASAP.

2. Can you send us samples?

Of course, we provide free samples.

3 Can you provide a certificate?

All of our products have a certificate of conformity, other certificates can also be provided as long as the early instructions.

4 If you have any other questions please contact me !